Sampling Equipment
-
Portable Manual Winch
Technical Parameters Weight: 75kg Working load: 100kg Flexible length of lifting arm: 1000~1500mm Supporting wire rope: φ6mm，100m Material: 316 stainless steel Rotatable angle of lifting arm:360° Feature It rotates 360°, can be fixed portable, can switch to neutral, so that the carrying falls freely, and it is equipped with a belt brake, which can control the speed during the free release process. The main body is made of 316 stainless steel corrosion-resistant material, matched with 316 sta... -
360 Degree Rotation Mini Electric Winch
Technical parameter
Weight: 100kg
Working load: 100kg
Telescopic size of lifting arm: 1000~1500mm
Supporting wire rope: φ6mm,100m
Rotatable angle of lifting arm : 360 degrees
-
Multi-Parameter Joint Water Sampler
The FS-CS series Multi-parameter Joint water sampler was independently developed by Frankstar Technology Group PTE LTD. Its releaser applies the principle of electromagnetic induction and can set a variety of parameters (time, temperature, salinity, depth, etc.) for programmed water sampling to achieve layered seawater sampling, which has high practicability and reliability.
-
Kevlar (Aramid) Rope
Brief Introduction
The Kevlar rope used for mooring is a kind of composite rope, which is braided from arrayan core material with low helix angle, and the outer layer is tightly braided by extremely fine polyamide fiber, which has high abrasion resistance, to obtain the greatest strength-to-weight ratio.
-
UAV-Mounted Comprehensive Sampling System
A “UAV + Payload” solution for coastal surveys, overcoming terrain, tide and manual limitations to deliver precise sediment and seawater sampling, with no personnel safety risks.
-
Release Hook
The release hook, independently developed and patented by SEA Research, is used for the release of equipment and has been successfully applied to the release of submersible markers on the Xue Long, Dong Fang Hong 2, Hai Da and Zhang Jian, with a purely mechanical structure providing high reliability and using 316L stainless steel heat treatment and strengthening technology. It is an indispensable tool for the release of deep sea survey dive markers and seabed base.
