Dyneema rope/High strength/High modulus/Low density

Short Description:

Introduction

Dyneema Rope is made of Dyneema high-strength polyethylene fiber, and then made into a super sleek and sensitive rope by the use of thread reinforcement technology.

A lubricating factor is added to the surface of the rope body, which improves the coating on the surface of the rope. The smooth coating makes the rope durable, durable in color, and prevents wear and fading.


Product Detail

Product Tags

Features

Mainly used on plankton trawl nets, it can provide static buoyancy, and the load-bearing capacity is lower than that of Kevlar ropes.

High Strength: On a weight for weight basis, Dyneema is 15 times stronger than steel wire.

Light Weight: Size for size, a rope made with Dyneema is 8 times lighter than steel wire rope.

Water resistant: Dyneema is hydrophobic and does not absorb water, meaning it remains light when working in wet conditions.

It Floats: Dyneema has a Specific Gravity of 0.97 which means it floats in water (specific gravity is a mesure of density. Water has an SG of 1, so anything with SG<1 will float and an SG>1 means it will sink).

Chemical resistance: Dyneema is chemically inert, and performs well in dry, wet, salty and humid conditions, as well as other situations where chemicals are present.

UV Resistant: Dyneema has very good resistance to photo degradation, maintaining its performance when exposed to UV lightHigh Strength: On a weight for weight basis, Dyneemais 15 times stronger than steel wire.

The physical properties of high-strength and high-modulus polyethylene fibers are excellent. Due to its high crystallinity, it is a chemical group that is not easy to react with chemical agents. Therefore, it is resistant to water, humidity, chemical corrosion, and ultraviolet rays, so there is no need to undergo ultraviolet resistance treatment. Corrosion resistance, acid and alkali resistance, excellent abrasion resistance, not only has high modulus, but also soft, has a long flexural life, the melting point of high-strength high-modulus polyethylene fiber is between 144~152C, exposed to 110C environment for a short time will not cause serious performance degradation, etc

Technical Parameter

Style

Nominal diameter

mm

Linear density

ktex

BreakingĀ strength

KN

HY-DNMS-KAC

6

23

25

HY-DNMS-ECV

8

44

42

HY-DNMS-ERH

10

56

63

HY-DNMS-EUL

12

84

89


  • Previous:
  • Next:

  • Write your message here and send it to us