-
Special Design for Oil Well Double Armoured Cable for Harsh Environment Detecting Electro-Optical Coaxial Tow Cable
FS-CWYY-CW1 Tide Logger is designed and produced by Frankstar. It is small in size, light in weight, flexible in use, can obtain tide level values within a long observation period, and temperature values at the same time. The product is very suitable for pressure and temperature observation in nearshore or shallow water, can be deployed for a long time. The data output is in TXT format.
-
High Quality Soil NPK/pH Analyzer Moisture Nutrient Sensor 7 in 1 Soil Tester
Frankstar in-situ nutrient sensor adapts established wet-chemistry methods into a fully automated, in-situ nutrient analyzer. The instrument strictly follows national standard detection protocols and accurately replicates manual laboratory procedures. Using precise reagent handling and automated reaction control, a single In-Situ Nutrient Sensor can simultaneously and continuously measure up to five key nutrients: nitrite (NO₂-N), nitrate (NO₃-N), phosphate (PO₄-P), ammonia nitrogen (NH₄-N), and silicate (SiO₃-Si).
-
Professional Advanced Metocean Mooring Data Buoy for Marine Transport Stations
The buoy body adopts CCSB structural steel ship plate, the mast adopts 5083H116 aluminium alloy, and the lifting ring adopts Q235B. The buoy adopts a solar power supply system and Beidou, 4G or Tian Tong communication systems, owning underwater observation wells, equipped with hydrologic sensors and meteorological sensors. The buoy body and anchor system can be maintenance-free for two years after being optimized. Now, it has been put into the offshore water of China and the middle deep water of the Pacific Ocean many times and runs stably.
-
Factory wholesale Remote Environmental Data Acquisition and Real-Time data Monitoring Buoy
Mini Wave Buoy can observe the wave data in short-term by the way of short-term fixed-point or drifting , providing stable and reliable data for Ocean scientific research, such as wave height, wave direction, wave period and so on. It can also be used to obtain section wave data in ocean section survey,and the data can be sent back to the client through Bei Dou, 4G, Tian Tong, Iridium and other methods.
-
High quality Steel Water sampler
The FS-CS series Multi-parameter Joint water sampler was independently developed by Frankstar Technology Group PTE LTD. Its releaser applies the principle of electromagnetic induction and can set a variety of parameters (time, temperature, salinity, depth, etc.) for programmed water sampling to achieve layered seawater sampling, which has high practicability and reliability.
-
100% Original Factory Smart Water and current Online Detection System—Smart Water Level Sensor
The Radar Water Level & Velocity Station relies on radar non-contact measurement technology to collect key hydrological data such as water level, surface velocity and flow in rivers, channels and other water bodies with high precision, all-weather and automated methods.
-
-
OEM Supply Wireless Remote Transmission River Early Warning Water Quality Monitoring Station
The Radar Water Level & Velocity Station relies on radar non-contact measurement technology to collect key hydrological data such as water level, surface velocity and flow in rivers, channels and other water bodies with high precision, all-weather and automated methods.
-
Factory best selling 2 MHz Underwater Pressure Principle Self-contained Tide Logger
FS-CWYY-CW1 Tide Logger is designed and produced by Frankstar. It is small in size, light in weight, flexible in use, can obtain tide level values within a long observation period, and temperature values at the same time. The product is very suitable for pressure and temperature observation in nearshore or shallow water, can be deployed for a long time. The data output is in TXT format.
-
Online & Self record Conductivity Temperature Depth Sensor
The Four-Electrode Conductivity/Salinity/TDS Sensor is designed for high-precision water quality monitoring. Utilizing advanced four-electrode non-polarization technology, it ensures long-term stability and anti-interference performance. It supports wide-range measurements of conductivity (0-500mS/cm), salinity (0-500ppt), and TDS (0-500ppt) with an accuracy of ±1.5%FS. Featuring an isolated power supply design, this sensor is ideal for industrial wastewater, seawater aquaculture, and environmental monitoring in harsh conditions. The corrosion-resistant polymer housing and G3/4 threaded structure withstand high-pressure and corrosive environments. Built-in temperature compensation and RS-485 communication (Modbus protocol) enable seamless integration into automation systems, reducing maintenance needs. It is the optimal solution for continuous monitoring of freshwater and seawater applications.
-
Pressure principle based temperature & water level tide logger
FS-CWYY-CW1 Tide Logger is designed and produced by Frankstar. It is small in size, light in weight, flexible in use, can obtain tide level values within a long observation period, and temperature values at the same time. The product is very suitable for pressure and temperature observation in nearshore or shallow water, can be deployed for a long time. The data output is in TXT format.
-
Monitoring Buoy for Wave Air and Water Quality
Integrated observation buoy is a simple and cost-effective buoy for offshore, estuary, river, and lakes. The shell is made of glass fibre reinforced plastic, sprayed with polyurea, powered by solar energy and a battery, which can realise continuous, real-time and effective monitoring of waves, weather, hydrological dynamics and other elements. Data can be sent back in the current time for analysis and processing, which can provide high-quality data for scientific research. The product has stable performance and convenient maintenance.
